Solar street light project inputs

Plan an off-grid street lighting installation around road geometry, lighting requirements and local solar conditions. Establish the operating schedule before selecting the LED luminaire, PV module, battery and controller. Namkoo can review the proposed configuration using project drawings and a clear equipment schedule.

Lighting and energy selection

• Define road width, pole spacing and mounting height.
• Set the required illuminance and uniformity for the site.
• Choose optics to suit the road layout.
• Confirm LED input power and dimming schedule.
• Estimate nightly energy consumption from operating hours.
• Assess seasonal sunlight and nearby shading.
• Size usable battery storage for the agreed reserve period.
• Confirm panel and controller compatibility.
• Check enclosure protection and ventilation.
• Specify monitoring only where required by the project.

Installation and quotation checklist

1. Provide the project location and delivery destination.
2. Confirm the number of lighting points.
3. Supply road or site layout drawings.
4. Specify pole material, height and mounting interfaces.
5. Provide site wind criteria and foundation design information.
6. Confirm the battery location and service access.
7. List required operating hours and dimming periods.
8. State any required model test documents.
9. Agree inspection, packing and spare-parts requirements.
10. Review the final component list, drawings and operating assumptions before placing an order.

TBC means to be confirmed for the project. This schedule lists design inputs rather than a fixed product specification. Send Namkoo the site layout, lighting targets and operating schedule to review compatible lamp, panel, storage and pole options.

Solar Street Light Configuration Review

• Luminaire: confirm enclosure rating
• Optics: match the road
• LED power: match the schedule
• PV: site-sized
• Battery: usable reserve
• Control: matched
  

  Site conditions:

1. Provide seasonal temperatures and solar exposure for the installation location.
2. State site elevation.
3. Confirm system voltage and component compatibility before ordering.
4. Match controller current to the panel and load.
5. Specify protected cable routes, connectors and access points for servicing.
6. Agree nightly operating hours.
7. Review the required reserve during periods of low solar generation.

Installation and Delivery Review

• Pole: approved drawing
• Foundation: confirm local structural design
• Finish: specified
• Quantity: agreed
• Packing: agreed for transport
• Check the final bill of materials, inspection requirements, delivery destination and spare-parts list with Namkoo.
• Documents: model-specific

Discuss Your Solar Lighting Project