Specify a Namkoo Q235 solar street light pole from the mounting height and equipment layout required at your site. Height, wall thickness, diameter and flange dimensions should follow the approved structural drawing. Hot-dip galvanizing and powder coating form the listed finishing process.
| Parameter | Reference |
|---|---|
| Model | STL-032 |
| Steel Grade | Q235 Steel |
| Wall Options | 2.5mm, 3mm, 3.5mm, 4mm, 4.5mm, 5.0mm |
| Height References | 3m, 4m, 5m, 6m, 8m, 10m, 12m, 20m, 30m |
| Protective Finish | Hot-dip galvanizing and powder coat |
| Intended Use | Solar lighting support |
| LED Life Reference | 50,000 h; confirm lamp |
| Mounting | To approved drawing |
| Warranty | Confirm terms |
| RAW STEEL Height: 3–30 m Wall: 2.5–12 mm Diameter: by design Baseplate: by design Formed and welded steel | GALVANIZED STEEL Height: 3–30 m Wall: 2.5–12 mm Diameter: by design Baseplate: by design Hot-dip galvanized; confirm finish | GALVANIZED + POWDER COAT Height: 3–30 m Wall: 2.5–12 mm Diameter: by design Baseplate: by design Galvanized with specified topcoat |
Solar Equipment Support: The pole supports the specified luminaire, panel and brackets. Confirm whether the quotation includes the battery, controller and panel, or the steel pole only. Include all component loads in the design.
Height Selection: Choose the fixed pole height from the lighting design. Confirm any adjustable feature separately.
Installation Planning: Match anchors, baseplate and cable access to the approved drawings. Confirm section joints and lifting requirements before delivery.
Luminaire Options: Specify LED output, optics and control settings separately. The 50,000-hour reference concerns the selected LED product, not the steel pole.
Project Cost Planning: Compare the complete pole, foundation, lighting equipment and maintenance scope. Solar operation depends on the chosen system and local sunlight.
Send the required pole height, section dimensions, arm configuration and base details with your enquiry. Include the lamp and solar component loads plus the site design criteria. Namkoo can discuss the fabrication specification and quantity. Confirm the coating, foundation connections and final drawings before production.
